Hey everyone,
I hope you're all doing well! I wanted to provide some important information regarding the location of weather files for Virtual Environment (VE) software. This change is applicable starting from VE 2022, so please take note if you're using the newer versions.
Up to and including VE 2021 the weather files were saved to:
C:\Program Files (x86)\IES\Shared Content\Weather
With VE 2022 and subsequent versions, there has been a change due to the software now being 64-bit. The new directory for weather files is:
C:\Program Files\IES\Shared Content\Weather
Please make sure to update your configurations accordingly to ensure seamless operation of the software:
1. Check the Weather File Location:
If you're using VE 2022 or a later version, ensure that your weather files are stored in the directory mentioned above.
2. Adjust Software Settings:
It's crucial to configure the software to look in the correct location for standard data and weather files. To do this, follow these steps:
Open the VE software.
Navigate to Help > Troubleshooting > Set Standard Data and Weather Location.
Ensure that you're pointing to the following directory: C:\Program Files\IES\Shared Content
Please note that pointing to the "Weather" folder found inside "Shared Content" is one folder too deep and should be avoided.
By following these steps, you'll make sure that your VE software is correctly configured for VE 2022 and beyond, and you'll have access to the necessary weather files without any issues.
The Weather File Thread
The core of the Virtual Environment. VE is a powerful, flexible and in-depth suite of building performance analysis tools.
Visit the VE webpage
Visit the VE webpage
Return to “VE (For Engineers and Architects)”
Jump to
- Announcements
- Virtual Environment Software
- ↳ VE (For Engineers and Architects)
- ↳ ModelBuilder
- ↳ ModelIT
- ↳ Component Modeller
- ↳ DXF drawings
- ↳ Importing from SketchUp
- ↳ Importing from Revit®
- ↳ Solar
- ↳ SunCast
- ↳ Thermal
- ↳ ApacheSim
- ↳ ApacheCalc/Loads
- ↳ ApacheHVAC
- ↳ MacroFlo
- ↳ Vista
- ↳ VistaPro
- ↳ Utilities
- ↳ Templates
- ↳ Weather
- ↳ Profiles
- ↳ Constructions
- ↳ Apache Systems
- ↳ Compliance and Ratings
- ↳ ASHRAE 90.1 App. G - PRM
- ↳ Part L2 - England & Wales
- ↳ ApacheSim(DSM) Method
- ↳ SBEM
- ↳ Section 6 - Scotland
- ↳ Part F - Northern Ireland
- ↳ Part L - Republic of Ireland
- ↳ Title 24
- ↳ General building compliance
- ↳ Lighting
- ↳ FlucsDL/Pro
- ↳ Radiance
- ↳ General Lighting
- ↳ Value & Cost
- ↳ DEFT
- ↳ CostPlan
- ↳ LifeCycle
- ↳ Egress
- ↳ Simulex
- ↳ LISI
- ↳ Mechanical
- ↳ IndusPro
- ↳ Airflow-CFD
- ↳ MicroFlo
- ↳ VE-Gaia
- ↳ Plug-Ins
- ↳ Revit plug-in
- ↳ Latest Update
- ↳ Frequently Asked Questions
- ↳ Known Issues
- ↳ Wish List
- ↳ SketchUp plug-in
- ↳ Latest Update
- ↳ Frequently Asked Questions
- ↳ Known Issues
- ↳ Wish List
- ↳ License Keys
- ↳ Good Practice
- ↳ VE Python API
- VE Community
- ↳ Welcome to the boards
- ↳ General discussion
- ↳ Suggestions
- VE-Pro in French
