breakdown of energy results

ApacheCalc – Heat loss/gain calculations using CIBSE procedures to determine design heating/cooling loads.
ApacheLoads – Design heating/cooling loads calculations using ASHRAE Heat Balance Method.
Post Reply
p1234567
VE Beginner
VE Beginner
Posts: 20
Joined: Thu May 18, 2017 3:34 pm

breakdown of energy results

Post by p1234567 »

Hi,
I am reaching the energy model that I needed as for energy consumption versus internal comfort. I have a question though, when looking at the results in Vistapro, I have the following:
I have heat pump with high efficiency system used and heat recovery ventilation. the breakdown of energy consumption is divided space heating, hot water, cooking, lighting, refrigeration , receptacle equipment, pumps , and fans.
so I have three areas I am trying to know what they represent: receptacle equipment, pumps and fans.
the receptacle equipment=======plug ins
pumps =================the compressor part of the cooling loop?
Fans======================the house ventilation in adition for the cooling loop fans?

I am using space heating complying with passive house, but as for percentage of energy breakdown I have 30% space heating electric consumption, if the pumps are related to the space heating then its 18% electric consumption should be added to the 30% to constitute 48% heating electric consumption?

please advice.
R.K.
thanks
p1234567
VE Beginner
VE Beginner
Posts: 20
Joined: Thu May 18, 2017 3:34 pm

Re: breakdown of energy results

Post by p1234567 »

what is AP sys Aux+ DHW/solar pumps energy ?
thanks
Post Reply