Page 1 of 1
BPRM Report
Posted: Thu Apr 03, 2014 4:04 pm
by fsarno
How do I remove the constructions which are not present in the proposed project from Table 1.4 of the BPRM simulation's report?
IES-VE automatically inserts the constructions which are present in the default template.
Regards.
Re: BPRM Report
Posted: Fri Jun 27, 2014 3:23 pm
by Rhind
Thank you for bringing this to our attention, this has been fixed for Feature Pack 1 which will be released shortly.
Re: BPRM Report
Posted: Mon Jul 07, 2014 9:55 am
by Cristian
I still have the same problem.
Also my principal heating source still says Electricity even if i do not use that for heating it should have been gas and the fenestration does nor reflect the same ratio as you would get from Model IT if you calculate that.
What can i do in order to have a proper pdf print of the BPRM Report because the text overlay the imagies and some time image is over the text and you can't read it
Re: BPRM Report
Posted: Thu Oct 15, 2015 9:36 am
by Elevera
The same happened to me.
There were some constructions assigned to shading elements and adjacent buildings that were coming up in the report.
I changed them all to constructions that are actually used in the building I am analysing.
In this way they are removed from the report as well, but:
1) there is still one construction that is not assigned to any rooms or shading elements but still comes up in the report.
2) It seems silly that constructions assigned to local shades, topographical shades and adjacent buildings are included in the report.
3) If the baseline building uses both Nonres and Semi-heated constructions the semi-heated constructions are not shown in the report.